Jose Longoria

1409 N. Chenango St.Ph: 979-479-2409

Angleton, TX 77515E-mail: Jose.Longoria@att.net

 

OBJECTIVE

Pursuing a career as a Piping designer within E&P Company and/or Engineering Firm. Background experience includes Piping, Mapping/GIS, Electrical, Civil, and Survey. Education includes, receiving AAS Degree in Chemical Technology (Process Operations) from Brazosport College at the end of 2016, AAS Degree in IT for Software Applications and Programming from ITT, Certificate in PDMS 3D Pipework & Structural modeling from Aveva Inc., and Industrial/Commercial Electricity from Brazosport College.

 

EDUCATION

8/2012 – Present Brazosport College – (Completion EOY 2016)Lake Jackson, TX

Associate of Applied Science Degree – Chemical Technology (Process Operations)

Process Piping - Field Measuring, Sketching and Layout

Introduction to Process Technology – Chemical and Refinery plant operations.

Process Instrumentation I – Instruments and instrument systems used in processing industry.

Process Technology I – Equipment – Operation and maintenance of process equipment.

Process Technology II – Process Control & Instrumentation, Extraction, Reaction, and Distillation towers

Industrial Process – Simtronics simulations & Instrumentation Basics

Safety, Health & Environment I, Applied Petrochemical Technology

 

9/2002 – 9/2004 ITT Technical InstituteHouston, TX

Associate of Applied Science Degree - Information Technology - Software Applications and Programming

 

6/1998 – 12/2000   Brazosport College Lake Jackson, TX

Industrial/Commercial Electricity – 40+ Hrs of College credits

 

EXPERIENCE

05/2012-01/2016 ConocoPhillips (Contract)                   Houston, TX

Piping Designer (CADWorx Plant 2012)

Responsibilities include working closely with engineers and designers to create and update Company facilities from the well head to processing facilities. Well sites, Departing Valve sites, Mid-Field headers.

Updating 3D Models per Company standards, Engineering design, ASME B31.8 and creating work packs consisting of P&IDs, BOM, Isos, Plot plans & Layouts, 2D & 3D Piping plans, Support plans & BOM, etc.…

Updated P&IDs covering all well facilities, departing valves, mid-field headers. HP/LP/LQ Headers lines, Separators Skids, Tanks, Fuel Gas Lines, and Flare. Updated departing/receiving valve sites consisting of pig launchers/receivers and mainline headers.

Pipe runs to and from Equipment such as Production Skids/Blowcases Skids (Separators), Knockout drums, Pumps, Flares, Compressors, Heat exchangers, 500lb Tanks. Worked on modular pipe racks and well facilities conducting field walk-downs and measurements.

 

10/2006-04/12 Universal Pegasus Int.                Houston, TX

Piping Designer (CADWorx Plant 2008)

Responsible for inputting initial layout and updating existing CAD files to the Company’s or Clients requirement. Responsible for developing detailed packages of drawings based on engineering concepts. Efficiently create or modify drawings in accordance with the design or markup, Perform task under minimal supervision. Tasks include updating 3D model layouts and working on Plot Plans, Piping Area Plans, Sections & Details, PFD’s, P&ID’s, and BOM & Isos.

Lead Mapper

Responsible for providing and assisting in the completion of Proposed, Ongoing, and As Built Pipeline Alignments Sheets while maintaining a set standard of high quality and accuracy. Ability to prepare project assignment/task using company standards and specifications and distributing to team member an effective method of deliverables. Gather, manipulate, compare, and compiling data information such as survey field notes, data points, existing drawings, plats, property deeds, and any and all addition information needed. Projects included work on Plats, Permits, Alignment sheets, Typical, Route Maps, etc. Using software provided to accurately display and reflect Ownership tracts, Elevation Profiles, Pipeline Aerial View, Pipe Stationing, Materials Band and Material Summary along the Pipeline. Reviewing all information on alignment sheets for accuracy and proficiency. Providing any assistance needed to others to assist in understanding and completing the project at hand. Additional information such as UTM Zones, State Planes and Coordinate Systems (Lat and Long, DMS, DM, Decimal Degree); Aerials and Tiffs, Raster and Vectors; is use in project completion.

Software:

-Autodesk Land Desktop 2006 - 2010; Autodesk Civil 3D 2006 , 2008, 2010; Raster Design 2006 - 2010; AutoCAD Map 3D & Geospatial

-ArcGIS (ArcMap, ArcCatalog);

-BlueSky Development Software – AlignDB

 

08/2005-09/2006 EPCO Inc. \ TEPPCO - Drafting Coordinator                    Houston, TX

Maintaining drafting documents of over 130 company facilities.  This includes the receiving and distribution of drafting documents to TEPPCO regional offices and numerous engineering companies.  Making sure the integrity of the TEPPCO specifications are enforced. Maintaining electronic files to ensure that drawings are kept up to date.  Coordinate drafting workload with other personnel to expedite the completion of as-built packages.  Revising existing CAD specifications to ensure that all disciplines maintain uniformity.  Drafting work includes P&ID’s, PFD’s, Plot Plans, Details, Wiring Diagrams, Schematics, One-line diagrams, etc.

Assisted in the design and drafting of new pipeline facilities and the upgrading of existing facilities. Work included instrument loops, control wiring, schematics one-line diagrams, plot plan layouts, junction box wiring, instrument/electrical details and as-built for several pipeline pump stations.

Software: Cadworx Plant 2004, Autodesk Map 2004, Raster Design 2004

 

1/2003-08/2005 JayMark Engineering – Civil Designer                    Houston, TX

Assisted in the development and completion of the following projects from clients like the City Of Houston, University Of Houston, Harris County, Houston Community College System (HCCS), HISD, NFISD, which include the type of work pertaining to:

-Residential Water Line projects (Junction City Subdivision), Storm Sewer & Roadway Reconstruction Project (Hayes Road), Road Resurfacing Projects (Galena Park, Deer Park), University Of Houston Projects (Proposed Roadway @ Calhoun & MLK, UH Parking Garage civil design) etc., Several School Drainage Improvement Projects with HISD, NFISD (Highland Heights, Oak Village Middle School) etc.

-Create and revise AutoCAD drawings for current projects following company issued standards and specification.

-Experience with Plan & Profile on water lines, sanitary lines, and storm sewer lines.

Software: Autocad 2004, ArcView

 

8/2001 – 8/2002 Dynegy, Inc. – CAD Drafter/GIS Technician                    Houston, TX

Create and revise Flowsheets, Plot Plans, Gathering Maps, Alignment Sheets and Electrical drawings for all company facilities following company issued standards and specifications. Utilize AutoCAD 2002 and RasterDesign (CAD Overlay) software.

Assist in assignment of drawing numbers/file names and maintenance of drawing database. Utilize Access 97.

Issue and check in drawings/file from contractors as part of drafting department’s document control procedures.

Communication with various in-house and field personnel to supply needed drawings and information.

Update GIS Maps and data. Utilize ArcView 3.2a software.

Construct multiple ArcView projects using existing file-based data and an existing database.

Used ArcView to manage data, work with themes and tables, create and edit shapefiles, querying and analyzing themes, geocoding address, and creating layouts to display a custom hardcopy products.

Software: ArcView 3.2; ArcView 8; AutoCAD 20002-CAD Overlay, P&ID’s; Mr.SID Geospatial Encoder 1.3.1; Lotus Notes;

 

11/2000 – 7/2001 Reliant Energy - Geographic Information Systems (GIS) DigitizerHouston, TX

Review and analyze residential plats to be added to existing land base database.

Used ArcMap to update and maintain land base features for specific coverage areas by using an existing database to create new data and linking it to the existing land base database. Used of aerials, raster images with ArcMap to ensure quality of new data.

Converted data between ArcMap and AutoCAD 2000i for locating accurate geographic coordinates of specific coverage areas.

Used VisiSoft for calculating the bearing, distances, and closures to ensure accuracy and proficiency.

Software: AutoCAD 2000i-VisiSoft-CAD Overlay 2000i; ArcView 8-ArcCatalog, ArcMap; Lotus Notes; MS Office 2000,

 

8/1999 - 11/2000 Testengeer Incorporated – Survey CAD DrafterBay City, TX

Responsible for creating AutoCAD drawings of plot plans, acreage survey plats, and topographical survey plats.

Assisted in locating property boundaries, construction layout, mapmaking, and other fieldwork required.

Researched Deeds and Official records of property and adjoiners.

Software: AutoCAD Releases 12 and 14, Softdesk 8, Survey 4 Program, Microsoft Office Programs

 

12/1998 - 8/1999 United Electrical & Instrumentation, Inc. - Electrical ApprenticeFreeport, TX

Layout, assemble, and install electrical fixtures, control equipment, and wiring used in electrical systems

Installed various types of conduits, cable trays, lighting fixtures, and control panels.

Bend, fit, and fasten pipes or tubing inside the partitions, walls, or other areas.

Follow blueprints, drawings, diagrams, or oral instruction.

 

6/1994 – 6/1998 United States Marine Corps – Marine E5-SergeantOahu, HI

 

CERTIFICATES & TRAINING

10/2010 AVEVA INC.PDMS V. 12.0 CertificateHouston, TX

PDMS Foundations

Structured – Design, Draft, Isodraft, Administration, etc…

Database – World, Site, Zone, Equipment, Sub-Equipment

Basic Interface – Menus, Forms, Toolbars, and Command Window

Model Elements – Drawlist, View, Controls, 3D View, Graphic Selection, Navigating Views, Mulitple Views

Attributes – Positioning and Orientation

Equipment Modeling – Creating Equipment, Equipment Templates and Standard Equipment

Pipework Modeling, Pipe Routing, Replacing Components, Data Consistency Checker, Clash Detection, Hole Management,

Isometric Production, Sloping/Falling Pipelines, Alternative Positioning forms, Pipe Assemblies, Pipe Splitting, Pipe Editing

 

4/2012 Basic and Advanced Structural Design

Setting-up the Database hierarchy for Structures, Creation of Beams & Columns, Modifying Structural Sections, Beam & Column Utilities,

Regular Structures, Section Fittings and Joints, Panels & Plates, Negative Extrusions and Panel Fittings

3D Aid Constructs & Working Planes, Curved Profiles, and Hole Management

 

BSD Consulting, Inc.

11/2011BSD Consulting, Inc.Skyline Training Course CompletionHouston, TX

Alignment Sheet Generation

 

15/2011BSD Consulting, Inc.AlignDB Training Course CompletionHouston, TX

Alignment Sheet Generation

 

REFERENCES

Will Loxterman – D&D Supervisor at ConocoPhillips – Wk. 832-486-2374, Cell. 713-397-8325

Maria Rodriguez – Director of Design at UniversalPegasus International – Wk. 713-354-6293, Cell. 832-754-3909